CWBT001
Autoclavable Knee-Length Cleanroom Booties
Knee-length overboots with anti-skid soles, made to be autoclaved with the coverall.
ISO 5 to 8For sterile or non-sterile areas
View specifications
Product specification sheet · +91 81602 44736 · info@cleanwear.in · cleanwear.in/products/coveralls/cleanroom-coverall-attached-hood
AsepticModel CWCV003
Cleanroom Coverall with Attached Hood
One-piece coverall and hood for faster gowning with no collar gap.
- Cleanroom classHow clean a room is, by airborne particle count. ISO 14644-1 classes (ISO 5 to 8) or EU GMP grades (A to D).
- ISO 5 to 7
- SterilitySupplied clean and packed so your site can sterilise it in its own validated autoclave cycle before use.
- For sterile or non-sterile areas
- Use
- Reusable
- SterilisationA pressure vessel that sterilises items with saturated steam, commonly at 121 °C or 134 °C. Reusable cleanroom garments are usually autoclaved after laundering.
- Steam autoclave
- Colours
- Blue, White, Brown
- Sizes
- S – 5XL
- ISO 9001 and ISO 13485 certified
- Quote within one working day
- Samples before bulk orders
Overview
A coverall with the hood sewn in, removing the collar interface where hoods and coveralls usually separate. Open face for use with a mask and goggles.
Features and construction
- Hood attached to the coverall
- Front zip with snap collar
- Elastic face opening
- Elastic or knit cuffs and ankles
- Bootie attachment loops
Where it is used
Aseptic processingSterile compoundingSemiconductor fabs
Standards referenced
ISO 14644-1
Specifications
Cleanroom Coverall with Attached Hood: specifications
Typical values. Garment life and performance depend on your laundering and sterilisation process, so validate in your own facility. Test reports are part of the technical pack.
Garment
| Design | One-piece coverall with sewn-in hood |
|---|---|
| Closure | Front zip with snap collar |
| Face opening | Elasticated, for use with mask and goggles |
| Cuffs and ankles | Elastic or knit, bootie loops |
| Design life | Designed for repeated steam autoclavingCycle life depends on your laundering and sterilisation process; confirm in your validation |
| Sterilisation | Steam autoclaveUse your validated cycle |
Fabric performance (typical values)
| Fabric | Antistatic polyester, 5 mm carbon gridMill data sheet on request |
|---|---|
| Composition | 99.17% polyester, 0.83% carbon fibreTypical value, fabric mill data sheet |
| Weave and yarn | 1/2 twill, 100D polyester filamentTypical value, fabric mill data sheet |
| Weight | 130 g/m²Typical value, fabric mill data sheet |
| Particle filtration efficiency | 60 to 80 %Typical value, fabric mill data sheet |
| Air permeability | 30 cc/cm²/sTypical value, fabric mill data sheet |
| Surface resistance | 10⁶ to 10⁸ ΩTypical value, fabric mill data sheet |
| Friction charge | Below 100 VTypical value, fabric mill data sheet |
| Charge decay time | 0.5 sTypical value, fabric mill data sheet |
| Tear strength (warp / weft) | 4,170 / 6,000 gfTypical value, fabric mill data sheet |
| Tensile strength (warp / weft) | 830 / 1,580 NTypical value, fabric mill data sheet |
| Colour fastness | Grade 4 to 5Typical value, fabric mill data sheet |
Supply
| Colours | Blue, white, brownOther colours on request |
|---|---|
| Sizes | S to 5XLSize chart in the technical pack. Custom sizes on request. |
| Packing | 1 per poly bag or sealed pouch |
Technical pack
Everything your QA team needs to approve this product
- Technical data sheetFabric, construction and performance dataPDF by email
- Size chartBody measurements for every sizePDF by email
- Care and autoclave guideLaundering, sterilisation and cycle trackingPDF by email
- CertificatesISO 9001, ISO 13485 and fabric test reportPDF by email
Email me the technical pack
Sent to your inbox within one working day. Only the documents you asked for.
Complete the set
Often ordered together
CWFM001
Reusable Cleanroom Face Mask
Snap-on mask that pairs with the cleanwear hood.
ISO 5 to 7
View specifications
Switching supplier?
Send us the garment you use today
Share the competitor part number, a photo or a sample piece. We match the specification or suggest an equivalent, with a sample for your trial.
Tell us what your cleanroom needs
Share your ISO class, quantities and timelines. We reply with options, a quote and sample availability within one working day.